Tianguang Frosted Teardrop Glass Shade — 2-1/4-Inch Fitter
10% off 1–2 items · 15% off 3–4 · 25% off 5+ · Applied automatically at checkout.
Physical products only. $0.01 Lighting Upgrades do not count toward the quantity tier and are not discounted. No code is needed for these tiers.
Choose the correct replacement part
Use the selected variant and the specifications on this page to choose the part. Match the stated dimensions and the socket, fitter, thread, hole or connector used by the existing assembly.
For electrical parts, match the stated input and output, AC or DC supply, current or wattage limits, and control requirements. A matching shape or base alone does not establish electrical compatibility.
For decorative parts, compare the listed shape, size, attachment and grade with the part being replaced. Use the product description for the contents and quantity supplied.
If a required measurement or connection is unclear, contact support with the product link and the dimensions or label from the existing part before ordering.
Shipping Policy · Return and Refund Policy · Warranty Service · Contact Support
Sourced factory-direct from Tianguang’s Zhongshan factory, this frosted teardrop glass shade has a nominal 2-1/4-inch necked fitter and a separate 1-15/16-inch bulb-entry opening. Its pointed bottom is closed.
This Tianguang frosted glass shade has a slender teardrop shape, one top opening and a closed pointed bottom. It is supplied as a replacement shade for a correctly matched necked fitter holder.
Specifications
| Height | 6-1/16 in (154.0 mm) |
|---|---|
| Maximum width | 3-1/4 in (82.6 mm) |
| Nominal fitter | 2-1/4 in (57.2 mm) |
| Clear bulb-entry opening | 1-15/16 in (49.2 mm) |
| Material and finish | Frosted glass |
| Shape | Teardrop with one top opening and closed pointed bottom |
| Holder class | Matching necked 2-1/4 in holder with three set screws; not included |
Choose the right fit
- Match the actual neck, lip thickness, holder depth and screw capture. The nominal fitter is not the clear bulb-entry diameter and is not a threaded UNO interface.
- The separately listed A19 bulb envelopes (58.2–60 mm) and G25 envelope (78.7 mm) exceed the 49.2 mm entry. They cannot pass through that opening and are not recommended as a direct-fit combination.
- The listed 175.3 mm T10 bulb is longer than the shade’s 154 mm outside height. A suitable enclosed assembly is not established.
- A nominal 48.3 mm GU10 lamp leaves only 0.9 mm diametrical difference to the entry; rounded dimensions do not establish insertion clearance. GU10 also needs a GU10 holder and does not directly fit E12 or E26 sockets.
- A 35.6 mm-wide E12 lamp is a geometric selection candidate, not a tested kit. Check internal taper, socket position, overall lamp length, heat clearance and the matching shade holder.
What is included
One glass shade. Holder, set screws, socket, retaining ring and bulb are not included.
Price and order unit
USD 16.80 per glass shade. Price is before eligible store discounts and applicable sales tax. Quantity discounts, when eligible, are calculated at checkout. Different sizes, materials or configurations require a separate quotation.
Installation information
Install only with a holder that securely captures the actual shade neck and with a bulb/socket combination that provides the required clearances and heat limits. Do not support this necked shade using an E26 retaining ring without an engineered matching interface.
U.S. delivery
Orders dispatch from Zhongshan, China. Delivery coverage, preparation time and transit estimates follow our U.S. shipping policy.
Product image: AI-generated visualization of the selected configuration, not a production photograph or a dimensioned drawing. Use the specifications and supplied installation information to select parts.
Browse Tianguang lighting parts and accessories
Buyer questions
Is the 2-1/4-inch fitter the bulb-entry opening?
No. The nominal fitter is 2-1/4 in (57.2 mm); the clear bulb-entry opening is 1-15/16 in (49.2 mm). The shade is 6-1/16 in high and 3-1/4 in at its widest.
What holder does the shade require?
A correctly matched necked 2-1/4-inch holder with three set screws, sold separately. Match the neck, lip, holder depth and screw capture; an E26 retaining ring is not a verified substitute.
Will the listed A19 or G25 bulbs pass through the opening?
No. Their listed envelopes are wider than the 49.2 mm entry. For another bulb, check the entry, internal taper, installed length, socket position and heat clearance.
Read the specifications and compatibility notes for the selected part before use. Follow the component and equipment instructions; have electrical installation and connection work reviewed by a qualified professional.
Free shipping to the contiguous 48 U.S. states. No minimum purchase.
Standard orders: approximately 7 calendar days to prepare, then 21–30 calendar days in transit. Allow approximately 28–37 calendar days total.
Oversized curbside freight: approximately 45 calendar days in transit, or 52 days total with standard preparation.
Custom production time: contact customer service; our team will reply after reviewing your message.
Export/import customs clearance, import duties, and import taxes included. Applicable sales tax is shown at checkout.
Eligible return requests must be submitted within 30 days. Buyer’s-remorse returns require written authorization; the customer purchases a trackable return label and pays return shipping. Confirmed damaged, defective, missing, or incorrect items may be resolved with parts, replacement, repair guidance, or a refund; if a return is required, we arrange or cover the appropriate return shipping. No restocking fee. Approved refunds are processed within 10 business days. Separately purchased expedited, special-freight, white-glove, storage, re-delivery, and similar service fees are non-refundable.
Already ordered? Check the latest available shipment status on 17TRACK.
Choose options
Shop with clarity
Free U.S. standard delivery
No minimum to the contiguous 48 states. Standard orders: approximately 7 calendar days to prepare, then 21–30 calendar days in transit. Allow approximately 28–37 calendar days total. Oversized curbside freight: approximately 45 calendar days in transit, or 52 days total with standard preparation. Custom production time: contact customer service; our team will reply after reviewing your message. Export/import customs clearance, import duties, and import taxes included. Applicable sales tax is shown at checkout.
Shipping details30-day return support
Written authorization is required. There is no restocking fee; preference-return postage is the customer’s responsibility.
Return details2-year limited warranty
Covers eligible manufacturing defects under normal residential use for 2 years from delivery. Contact us with your order number, issue details, and photos or video to request service.
Warranty details · ContactOperated by TIANGUANG CROSS-BORDER E-COMMERCE LIMITED, a Hong Kong-registered trading company · BRC No. 80039146-000-03-26-4
Orders ship from Zhongshan, Guangdong, China. The Hong Kong registered office is not the shipping origin or a return address.